dotfiles/mcp-config/install.sh

#!/usr/bin/env sh
# One-time bootstrap for the covert-gpt MCP gateway on a user's laptop.
#
#   curl -fsSL https://git.nic-oconnor.com/public/dotfiles/raw/branch/main/mcp-config/install.sh | sh
#
# It is interactive (prompts for the user's LiteLLM key) UNLESS LITELLM_KEY is
# already set in the environment, e.g.:
#   curl -fsSL .../install.sh | LITELLM_KEY=sk-... sh
#
# What it installs (all under the user's home, no root):
#   ~/.config/mcp-sync/sync.sh   the per-shell refresh hook (from Gitea)
#   ~/.config/mcp-sync/key       the user's LiteLLM virtual key (chmod 600)
#   a line in the user's shell rc that sources sync.sh on each shell start
# After this, every new shell refreshes the gateway config automatically.
set -eu

# Fallback source, used ONLY when this script is not run from a checkout.
# A Gitea *API* endpoint, not the web /raw/ route: /raw/ answers an
# unauthorized request with a 200 and an HTML login page, which `curl -f`
# reports as success. The API returns an honest 401/403. Set GITEA_KEY to read
# a private repo.
API_BASE="${MCP_SYNC_API_BASE:-https://git.nic-oconnor.com/api/v1/repos/public/dotfiles}"
REF="${MCP_SYNC_REF:-main}"
SCRIPT_DIR="$(CDPATH= cd -- "$(dirname -- "$0")" && pwd 2>/dev/null)" || SCRIPT_DIR=""
SYNC_HOME="$HOME/.config/mcp-sync"
SYNC_SH="$SYNC_HOME/sync.sh"
KEYFILE="$SYNC_HOME/key"
HOOK_MARKER="# >>> covert-gpt mcp-sync >>>"

say() { printf '%s\n' "$*" >&2; }

command -v curl >/dev/null 2>&1 || { say "error: curl is required"; exit 1; }

mkdir -p "$SYNC_HOME"

# --- 1. install the sync hook ----------------------------------------------
# Prefer the copy sitting next to this script: when bootstrap.sh runs the
# module from a checkout there is no reason to go to the network, and it makes
# the module work on a box that cannot reach Gitea at all.
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/sync.sh" ]; then
  say "Installing mcp-sync hook from $SCRIPT_DIR/sync.sh"
  cp "$SCRIPT_DIR/sync.sh" "$SYNC_SH"
else
  SYNC_URL="$API_BASE/raw/mcp-config/sync.sh?ref=$REF"
  say "Fetching mcp-sync hook..."
  # Fetch to a temp file and CHECK IT before overwriting the installed hook.
  # The API endpoint gives an honest 4xx, but keep the shebang check as a
  # backstop: if anything ever writes an HTML login page over sync.sh, the shell
  # fails to parse it, the hook silently does nothing, OPENCODE_CONFIG is never
  # exported, and opencode comes up with no covert-gpt provider at all.
  _tmp="$(mktemp)" || { say "error: mktemp failed"; exit 1; }
  if [ -n "${GITEA_KEY:-}" ]; then
    set -- -H "Authorization: token $GITEA_KEY"
  else
    set --
  fi
  if ! curl -fsSL -m 15 "$@" "$SYNC_URL" -o "$_tmp" || [ ! -s "$_tmp" ]; then
    rm -f "$_tmp"
    say "error: could not fetch $SYNC_URL"
    [ -n "${GITEA_KEY:-}" ] ||
      say "       The repo may be private — export GITEA_KEY and re-run."
    exit 1
  fi
  case "$(head -c 2 "$_tmp")" in
    '#!') mv "$_tmp" "$SYNC_SH" ;;
    *)
      rm -f "$_tmp"
      say "error: $SYNC_URL did not return a script."
      exit 1
      ;;
  esac
fi
chmod 0644 "$SYNC_SH"

# --- 1b. record the checkout as the config source --------------------------
# THE POINT OF THIS FILE: bootstrap.sh already cloned this repo over
# authenticated git, so the per-shell hook must never have to re-fetch the
# gateway config anonymously over HTTP. Needing that was the only reason the
# repo ever had to be world-readable. Record where we ran from and sync.sh
# reads both the config and the skills straight off disk.
if [ -n "$SCRIPT_DIR" ] && [ -f "$SCRIPT_DIR/opencode.gateway.json" ]; then
  if REPO_DIR="$(CDPATH= cd -- "$SCRIPT_DIR/.." && pwd 2>/dev/null)"; then
    printf '%s\n' "$REPO_DIR" > "$SYNC_HOME/source"
    say "Config source: $REPO_DIR (local checkout, no network needed)."
  fi
fi

# --- 2. capture the LiteLLM key -------------------------------------------
# An already-stored key is as good as one in the env: bootstrap.sh re-runs this
# module on every pass, and prompting a box that is already configured would
# make an otherwise unattended bootstrap hang on a TTY read.
if [ "${LITELLM_KEY:-}" = "" ] && [ -f "$KEYFILE" ]; then
  LITELLM_KEY="$(cat "$KEYFILE" 2>/dev/null || true)"
  [ -n "$LITELLM_KEY" ] && say "Reusing the key already stored at $KEYFILE."
fi
if [ "${LITELLM_KEY:-}" = "" ]; then
  # Read from the controlling TTY since stdin is the piped script.
  if [ -r /dev/tty ]; then
    printf 'Paste your LiteLLM virtual key (sk-...): ' >&2
    IFS= read -r LITELLM_KEY < /dev/tty
  else
    say "error: no LITELLM_KEY in env and no TTY to prompt."
    say "re-run as:  curl ... | LITELLM_KEY=sk-... sh"
    exit 1
  fi
fi
LITELLM_KEY="$(printf '%s' "$LITELLM_KEY" | tr -d ' \t\r\n')"
case "$LITELLM_KEY" in
  sk-*) : ;;
  *) say "warning: key does not start with 'sk-' — continuing anyway." ;;
esac
printf '%s' "$LITELLM_KEY" > "$KEYFILE"
chmod 0600 "$KEYFILE"
say "Key stored at $KEYFILE (0600)."

# --- 3. wire the shell rc --------------------------------------------------
# For zsh the hook goes in ~/.zshrc.local, NOT ~/.zshrc. The dotfiles repo
# MANAGES ~/.zshrc and overwrites it wholesale on every bootstrap
# (zsh/install.sh), so a hook written there survives only until the next
# bootstrap run — and then models and skills silently vanish, because sync.sh
# never runs and OPENCODE_CONFIG is never exported. ~/.zshrc.local is the
# unmanaged file the managed zshrc sources last, so the hook persists.
#
# Do NOT pick the file from $SHELL alone. On a fresh box bootstrap runs this
# from the user's ORIGINAL shell: zsh/ has just switched the login shell to zsh,
# but $SHELL in this process still says bash. The hook then went into ~/.bashrc,
# below zsh/'s auto-exec hook, so every new terminal exec'd into zsh before
# reaching it, zsh never sourced sync.sh, and opencode came up unconfigured.
# The dotfiles-managed ~/.zshrc (or zsh as the account's login shell) wins.
_login_shell="$(getent passwd "$(id -un)" 2>/dev/null | cut -d: -f7)"
if grep -qs 'Managed by dotfiles/zsh/install.sh' "$HOME/.zshrc"; then
  RC="$HOME/.zshrc.local"
else
  case "${_login_shell:-${SHELL:-}}" in
    *zsh) RC="$HOME/.zshrc.local" ;;
    *bash) RC="$HOME/.bashrc" ;;
    *) [ -f "$HOME/.zshrc" ] && RC="$HOME/.zshrc.local" || RC="$HOME/.bashrc" ;;
  esac
fi
touch "$RC"
# It sits alongside the user's secrets; keep it non-readable by others.
[ "$RC" = "$HOME/.zshrc.local" ] && chmod 0600 "$RC" 2>/dev/null || true

if grep -qF "$HOOK_MARKER" "$RC" 2>/dev/null; then
  say "Shell hook already present in $RC."
else
  {
    printf '\n%s\n' "$HOOK_MARKER"
    printf '%s\n' '[ -f "$HOME/.config/mcp-sync/sync.sh" ] && . "$HOME/.config/mcp-sync/sync.sh"'
    printf '%s\n' "# <<< covert-gpt mcp-sync <<<"
  } >> "$RC"
  say "Added mcp-sync hook to $RC."
fi

# --- 4. run it once now so the config exists immediately -------------------
# shellcheck disable=SC1090
. "$SYNC_SH" || true

# If this is the initial install (key just written now), restart Hermes.
# The key file mtime changed, but we need to compare hashes to know if it's
# actually new (not just a touch). Only restart if we're not in a re-run.
if [ -f "$KEYFILE" ]; then
  KEY_HASH="$(sha256sum "$KEYFILE" 2>/dev/null | cut -d' ' -f1)"
  PREV_KEY_HASH=""
  if [ -f "$HOME/.config/mcp-sync/.key-hash" ]; then
    PREV_KEY_HASH="$(cat "$HOME/.config/mcp-sync/.key-hash" 2>/dev/null || true)"
  fi
  if [ "$KEY_HASH" != "$PREV_KEY_HASH" ]; then
    # Key changed - update .env and restart Hermes if running
    if [ -f "$HOME/.hermes/.env" ]; then
      say "hermes: Key changed during install — updating ~/.hermes/.env"
      if command -v sed >/dev/null 2>&1; then
        sed -i "s|^LITELLM_KEY=.*$|LITELLM_KEY=$LITELLM_KEY|" "$HOME/.hermes/.env"
      else
        awk -v key="$LITELLM_KEY" '/^LITELLM_KEY=/ {print "LITELLM_KEY=" key; next} {print}' "$HOME/.hermes/.env" >"$HOME/.hermes/.env.tmp" && mv "$HOME/.hermes/.env.tmp" "$HOME/.hermes/.env"
      fi
      chmod 0600 "$HOME/.hermes/.env"
    fi
    if pgrep -f 'hermes-agent/hermes' >/dev/null 2>&1; then
      HERMES_PID="$(pgrep -f 'hermes-agent/hermes')"
      say "hermes: Restarting to pick up new key (PID: $HERMES_PID)..."
      kill "$HERMES_PID" || true
      sleep 1
      (cd "$HOME" && nohup hermes >/dev/null 2>&1 &)
      say "hermes: Hermes restarted."
    fi
  fi
  printf '%s\n' "$KEY_HASH" >"$HOME/.config/mcp-sync/.key-hash"
fi

say ""
say "Done. Open a new terminal (or 'source $RC') and run opencode."
say "The gateway config refreshes automatically on each new shell."