Profiles: machines, roles and shared layers

The repo was one machine's capture. It is now a set of profiles built from layers under profiles/: machines/ hp-laptop, macbook-air-m2, coder-desktop roles/ developer, devops, ai-agents features/ handoff (lan-mouse) shared base, personal, personal-desktop A profile resolves to its includes (depth first), any --roles, then itself; for a path several layers provide, the last wins. install.sh --show prints the layers and which one owns each file. Hyprland settings no longer share a file: base's hyprland.lua loads ~/.config/hypr/layers/*.lua with Omarchy's own require_all, and bindings.lua stays stock so nothing binds twice. Verified with Hyprland 0.56.2 --verify-config for all three profiles, plus a broken probe layer to prove the directory is loaded. packages.txt gains per-line arch (Arch Linux ARM lacks opencode, codex, mise, shellcheck) and cmd= (skip when dotfiles' ~/.local/bin already provides the command), and an [ignore] section that replaces capture.sh's hard-coded list. Tab-separated records would have collapsed empty fields under read, so package records use the unit separator. hp-laptop: re-captured. monitors.lua catch-all scale is now 1, shell.json has four new plugins, fix-stuck-displays has its connector-name fix, navbar-cat is gone, plugin-manager and omarchy-phone are pinned, the herdr-hud working tree is re-diffed and bin/herdr-web rides along. Its handoff peer is now the Air (192.168.1.49); the old default list was the HP's own addresses, written from the Air's side. macbook-air-m2: captured read-only over SSH as it is (no themes, plugins or bar changes). Its LAN_MOUSE_POINTER_SCALE=0.7 moves from the shared unit into a lan-mouse.service.d drop-in in its own layer. coder-desktop: the Omarchy settings covert-cloud's image used to patch in by hand (Virtual-1 at 1920x1080, no animations, stay-awake, Retro 82 once), for the image to apply at a pinned commit. Roles reach it per workspace via install.sh --roles ... --no-clobber. capture.sh writes each file back into the layer that owns it, and refuses to run before the first layered install unless --force, since the old file shapes would land in shared layers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0153egowV1Xw2RNjZnSyZicc
2026-10-16 16:01:54 -04:00
parent b3f3f46b98
commit 87a31858fd
98 changed files with 2010 additions and 532 deletions
@@ -0,0 +1,28 @@
+general.import = [ "~/.local/state/omarchy/current/theme/alacritty.toml" ]
+
+[env]
+TERM = "xterm-256color"
+
+[terminal]
+osc52 = "CopyPaste"
+
+[font]
+normal = { family = "JetBrainsMono Nerd Font", style = "Regular" }
+bold = { family = "JetBrainsMono Nerd Font", style = "Bold" }
+italic = { family = "JetBrainsMono Nerd Font", style = "Italic" }
+size = 8
+
+[window]
+padding.x = 14
+padding.y = 14
+decorations = "None"
+
+[keyboard]
+bindings = [
+{ key = "Insert", mods = "Shift", action = "Paste" },
+{ key = "Insert", mods = "Control", action = "Copy" },
+# Send Shift+Return as CSI-u so TUIs can distinguish it from Return without treating it as Alt+Return.
+{ key = "Return", mods = "Shift", chars = "\u001B[13;2u" },
+# Legacy encoding sends Alt+Shift+Return the same as Alt+Return; send CSI-u so tmux can match M-S-Enter.
+{ key = "Return", mods = "Alt|Shift", chars = "\u001B[13;4u" }
+]
@@ -0,0 +1,26 @@
+[main]
+include=~/.local/state/omarchy/current/theme/foot.ini
+term=xterm-256color
+font=JetBrainsMono Nerd Font:size=8
+pad=14x14
+initial-window-mode=windowed
+workers=0
+
+[scrollback]
+lines=10000
+multiplier=7.0
+
+[cursor]
+style=block
+blink=no
+
+[key-bindings]
+clipboard-copy=Control+Insert Control+Shift+c XF86Copy
+primary-paste=none
+clipboard-paste=Shift+Insert Control+Shift+v XF86Paste
+
+[text-bindings]
+# Send Shift+Return as CSI-u so TUIs can distinguish it from Return.
+\x1b[13;2u=Shift+Return
+# Send Alt+Shift+Return as CSI-u so tmux can match M-S-Enter.
+\x1b[13;4u=Mod1+Shift+Return
@@ -0,0 +1,41 @@
+# Dynamic theme colors
+config-file = ?"~/.local/state/omarchy/current/theme/ghostty.conf"
+
+# Font
+font-family = "JetBrainsMono Nerd Font"
+font-style = Regular
+font-size = 12
+
+# Window
+window-theme = ghostty
+window-padding-x = 14
+window-padding-y = 14
+confirm-close-surface=false
+resize-overlay = never
+gtk-toolbar-style = flat
+
+# Cursor styling
+cursor-style = "block"
+cursor-style-blink = false
+
+# Cursor styling + SSH session terminfo
+# (all shell integration options must be passed together)
+shell-integration-features = no-cursor,ssh-env
+
+# Keyboard bindings
+keybind = shift+insert=paste_from_clipboard
+keybind = control+insert=copy_to_clipboard
+# Send Shift+Enter as CSI-u so TUIs can distinguish it from Enter.
+keybind = shift+enter=csi:13;2u
+# Legacy encoding sends Alt+Shift+Enter the same as Alt+Enter; send CSI-u so tmux can match M-S-Enter.
+keybind = alt+shift+enter=csi:13;4u
+keybind = super+control+shift+alt+arrow_down=resize_split:down,100
+keybind = super+control+shift+alt+arrow_up=resize_split:up,100
+keybind = super+control+shift+alt+arrow_left=resize_split:left,100
+keybind = super+control+shift+alt+arrow_right=resize_split:right,100
+
+# Slowdown mouse scrolling
+mouse-scroll-multiplier = 0.95
+
+# Fix general slowness on hyprland (https://github.com/ghostty-org/ghostty/discussions/3224)
+async-backend = epoll
@@ -0,0 +1,10 @@
+-- Extra autostart processes.
+-- o.launch_on_start("my-service")
+
+-- Keyboard/mouse sharing with the other Omarchy laptop (lan-mouse).
+-- Runs as a daemon; input only crosses the screen edge once the peer is
+-- activated, so starting it here is inert until Handoff is toggled on.
+-- Superseded by the lan-mouse.service systemd user unit (journald logging,
+-- ordering after the portal, Restart=on-failure). launch_on_start sent both
+-- output streams to /dev/null, which hid every pairing failure.
+-- o.launch_on_start("lan-mouse daemon")
@@ -0,0 +1,72 @@
+-- Keep only your personal input overrides here. Uncommented settings below
+-- replace Omarchy's defaults.
+
+-- Keyboard layout and options.
+-- See https://wiki.hypr.land/Configuring/Basics/Variables/#input
+-- hl.config({
+--   input = {
+--     -- Use multiple keyboard layouts and switch between them with Left Alt + Right Alt.
+--     kb_layout = "us,dk,eu",
+--     kb_options = "compose:caps,shift:both_capslock_cancel,grp:alts_toggle",
+--
+--     -- Use a specific keyboard variant if needed (e.g. intl for international keyboards).
+--     kb_variant = "intl",
+--
+--     -- Change speed of keyboard repeat.
+--     repeat_rate = 40,
+--     repeat_delay = 250,
+--
+--     -- Start with numlock on by default.
+--     numlock_by_default = true,
+--
+--     -- Increase sensitivity for mouse/trackpad (default: 0).
+--     sensitivity = 0.35,
+--
+--     -- Turn off mouse acceleration (default: adaptive).
+--     accel_profile = "flat",
+--
+--     touchpad = {
+--       -- Use natural (inverse) scrolling.
+--       natural_scroll = true,
+--
+--       -- Use two-finger clicks for right-click instead of lower-right corner.
+--       clickfinger_behavior = true,
+--
+--       -- Control the speed of your scrolling.
+--       scroll_factor = 0.4,
+--
+--       -- Enable the touchpad while typing.
+--       disable_while_typing = false,
+--
+--       -- Left-click-and-drag with three fingers.
+--       drag_3fg = 1,
+--     },
+--   },
+-- })
+
+-- App-specific touchpad scroll speeds.
+-- o.window("(Alacritty|kitty|foot)", { scroll_touchpad = 1.5 })
+-- o.window("com.mitchellh.ghostty", { scroll_touchpad = 0.2 })
+
+-- Enable touchpad gestures for changing workspaces.
+-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Gestures/
+hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })
+
+-- Enable touchpad gestures for moving focus (helpful on scrolling layout).
+-- hl.gesture({ fingers = 3, direction = "left", action = function() hl.dispatch(hl.dsp.focus({ direction = "l" })) end })
+-- hl.gesture({ fingers = 3, direction = "right", action = function() hl.dispatch(hl.dsp.focus({ direction = "r" })) end })
+
+-- lan-mouse (omarchy-handoff) virtual pointer: kill the SECOND acceleration pass.
+-- lan-mouse forwards RELATIVE deltas that the SENDING compositor has already
+-- accelerated. Omarchy leaves accel_profile unset (adaptive), so the receiver
+-- amplifies them again and the pointer arrives hypersensitive while the local
+-- trackpad feels normal. "flat" applies no curve, so a forwarded delta moves
+-- exactly as far as the sender intended.
+-- The name is "unknown-device" because wlr-virtual-pointer gives Hyprland no
+-- name (virtual KEYBOARDS get named, pointers don't). Verified on this machine
+-- with `lan-mouse test-emulation` + `hyprctl devices`: no real device here is
+-- named unknown-device* (real pointers are elan0138:*, mouse-passthrough*,
+-- dp-3-1), so this rule cannot touch the trackpad. Two entries because the
+-- daemon may hold more than one virtual pointer at a time.
+hl.device({ name = "unknown-device", sensitivity = 0, accel_profile = "flat" })
+hl.device({ name = "unknown-device-1", sensitivity = 0, accel_profile = "flat" })
@@ -0,0 +1,48 @@
+-- BEGIN hyprmoncfg wake settings
+-- Shared with Omarchy while hyprmoncfg manages displays.
+hl.monitor({ output = "eDP-1", mode = "preferred", position = "0x0", scale = 1.25 })
+-- END hyprmoncfg wake settings
+-- See https://wiki.hypr.land/Configuring/Basics/Monitors/
+-- List current monitors and supported resolutions with: hyprctl monitors all
+--
+-- SINGLE SOURCE OF TRUTH for display config.
+-- Do not add monitor rules anywhere else (hyprland.lua, a hyprmoncfg-generated
+-- file, etc.) -- overlapping rules from several files were what made external
+-- displays unrecoverable before.
+
+local omarchy_gdk_scale = 1
+local omarchy_monitor_scale = 1
+
+hl.env("GDK_SCALE", tostring(omarchy_gdk_scale))
+
+-- Catch-all: anything not named below gets its EDID-preferred mode.
+hl.monitor({ output = "", mode = "preferred", position = "auto", scale = omarchy_monitor_scale })
+
+-- Built-in laptop panel.
+hl.monitor({
+  output = "desc:Chimei Innolux Corporation 0x1642",
+  mode = "1920x1200@60",
+  position = "auto",
+  scale = 1.25,
+})
+
+-- LG IPS236 on the laptop's own HDMI port.
+hl.monitor({
+  output = "desc:LG Electronics IPS236        105NDLS5A720",
+  mode = "1920x1080@60",
+  position = "auto",
+  scale = 1,
+})
+
+-- LG TV via the Anker USB-C dock.
+-- Deliberately NOT forced to 3840x2160@60: the dock negotiates DP alt-mode
+-- with only 2 lanes (pin assignment D), which leaves no bandwidth headroom at
+-- 4K60. Forcing it produced a "monitor has no mode" loop. "preferred" is
+-- 3840x2160@30 here, which links reliably. Use 1920x1080@120 instead if you
+-- want high refresh over this dock.
+hl.monitor({
+  output = "desc:LG Electronics LG TV SSCR2 0x01010101",
+  mode = "preferred",
+  position = "auto",
+  scale = 1.25,
+})
@@ -0,0 +1,23 @@
+# Remove the include below to disconnect Kitty from Omarchy's theming system.
+include ~/.local/state/omarchy/current/theme/kitty.conf
+
+# Settings below override Omarchy's defaults in /etc/xdg/kitty/kitty.conf.
+# Learn more: https://sw.kovidgoyal.net/kitty/conf/
+
+# Font
+# font_family JetBrainsMono Nerd Font
+# font_size 12
+
+# Window padding
+# window_padding_width 14
+
+# Unmap a shortcut, passing it through to the terminal application
+# map ctrl+insert
+
+# Set or replace a shortcut
+# map ctrl+shift+c copy_to_clipboard
+
+# Remove all inherited shortcuts, including Kitty's built-in shortcuts
+# clear_all_shortcuts yes
+
+font_size 8.0