Capture this laptop's Omarchy customizations

Everything on top of a stock Omarchy 4.0.4-1 install, gathered so a second
machine can be brought to the same state: the ~/.config files that actually
differ from the shipped defaults, the three hand-built themes, the ten shell
plugins pinned to commits, the two custom scripts, two user units, and the
/etc drop-ins.

install.sh applies it all idempotently, backing up anything it overwrites.
capture.sh runs the other way so the repo stays the source of truth rather
than a snapshot that rots.

indie.herdr-hud's ten local-only commits ship as a git bundle plus a
working-tree patch, since they stay off the upstream PR deliberately.

Secrets, the dotfiles repo's territory (shell/git/mise), the remote-access
stack and aether-managed themes are all scoped out; README says why for each.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

config/hypr/autostart.lua

@@ -0,0 +1,10 @@
+-- Extra autostart processes.
+-- o.launch_on_start("my-service")
+
+-- Keyboard/mouse sharing with the other Omarchy laptop (lan-mouse).
+-- Runs as a daemon; input only crosses the screen edge once the peer is
+-- activated, so starting it here is inert until Handoff is toggled on.
+-- Superseded by the lan-mouse.service systemd user unit (journald logging,
+-- ordering after the portal, Restart=on-failure). launch_on_start sent both
+-- output streams to /dev/null, which hid every pairing failure.
+-- o.launch_on_start("lan-mouse daemon")

config/hypr/bindings.lua

@@ -0,0 +1,43 @@
+-- Keep only your personal keybinding overrides here. Add new bindings or
+-- unbind defaults before replacing them.
+
+-- See current bindings and descriptions:
+--   omarchy menu keybindings --print
+
+-- To disable every Omarchy default binding, set this in
+-- ~/.config/hypr/hyprland.lua before require("default.hypr.omarchy"), then add
+-- only the bindings you want below:
+--   omarchy_default_bindings = false
+
+-- To disable all preinstalled app/webapp bindings, set:
+--   omarchy_preinstalled_bindings = false
+
+-- Add a new binding.
+-- o.bind("SUPER + SHIFT + R", "SSH", "alacritty -e ssh your-server")
+
+-- Change an existing binding by unbinding it first, then binding the key again.
+-- This example changes SUPER+SPACE from the launcher to the Omarchy root menu.
+-- hl.unbind("SUPER + SPACE")
+-- o.bind("SUPER + SPACE", "Omarchy menu", "omarchy-menu toggle root")
+
+-- Disable a default binding without replacing it.
+-- hl.unbind("SUPER + SHIFT + B")
+
+-- Logitech MX Keys examples:
+-- o.bind("SUPER + SHIFT + S", nil, "omarchy-capture-screenshot")
+-- o.bind("SUPER + H", nil, "voxtype record toggle")
+-- o.bind("SUPER + PERIOD", nil, "omarchy-shell shell toggle omarchy.emojis")
+
+-- Open Claude instead of the stock ChatGPT webapp.
+hl.unbind("SUPER + SHIFT + A")
+o.bind("SUPER + SHIFT + A", "Claude", { webapp = "https://claude.ai" })
+
+-- Herdr HUD overlay (indie.herdr-hud native plugin, local branch).
+o.bind("SUPER + H", "Toggle Herdr HUD", "omarchy-shell shell toggle indie.herdr-hud '{}'")
+o.bind("SUPER + ALT + H", "Show or hide Herdr HUD button", "omarchy-shell shell call indie.herdr-hud toggleVisibility '{}'")
+o.bind("SUPER + CTRL + DOWN", "Herdr HUD: next agent", "omarchy-shell shell call indie.herdr-hud nextAgent '{}'")
+o.bind("SUPER + CTRL + UP", "Herdr HUD: previous agent", "omarchy-shell shell call indie.herdr-hud previousAgent '{}'")
+
+-- Handoff: share this keyboard/mouse with the other Omarchy laptop.
+-- SUPER+K is already "Keybindings", so this takes SUPER+SHIFT+K.
+o.bind("SUPER + SHIFT + K", "Toggle Handoff (keyboard/mouse sharing)", "omarchy-handoff toggle")

config/hypr/hyprland.lua

@@ -0,0 +1,32 @@
+-- Learn how to configure Hyprland: https://wiki.hypr.land/Configuring/Start/
+
+-- Omarchy's bootstrap keeps path setup out of this user config.
+dofile((os.getenv("OMARCHY_PATH") or "/usr/share/omarchy") .. "/default/hypr/bootstrap.lua")
+
+-- Disable all Omarchy default bindings. Add your own in hypr/bindings.lua.
+-- omarchy_default_bindings = false
+--
+-- Or disable only bindings for Omarchy's preinstalled apps/web apps while
+-- keeping core window-manager bindings:
+-- omarchy_preinstalled_bindings = false
+
+-- Load Omarchy defaults.
+require("default.hypr.omarchy")
+
+-- Put your personal overrides in these files. They're loaded after Omarchy's
+-- defaults so package updates can improve the defaults without rewriting your
+-- ~/.config/hypr files.
+require("hypr.monitors")
+require("hypr.input")
+require("hypr.bindings")
+require("hypr.looknfeel")
+require("hypr.autostart")
+
+-- Toggle config flags dynamically.
+require("default.hypr.toggles")
+
+-- Add any other personal Hyprland configuration below.
+-- o.window("qemu", { workspace = "5" })
+
+-- Added by hyprmoncfg: its generated monitor rules load last, so nothing before this can override the applied layout.
+do local path = os.getenv("HOME") .. "/.config/hypr/hyprmoncfg-monitors.lua"; local file = io.open(path, "r"); if file then file:close(); dofile(path) end end

config/hypr/input.lua

@@ -0,0 +1,72 @@
+-- Keep only your personal input overrides here. Uncommented settings below
+-- replace Omarchy's defaults.
+
+-- Keyboard layout and options.
+-- See https://wiki.hypr.land/Configuring/Basics/Variables/#input
+-- hl.config({
+--   input = {
+--     -- Use multiple keyboard layouts and switch between them with Left Alt + Right Alt.
+--     kb_layout = "us,dk,eu",
+--     kb_options = "compose:caps,shift:both_capslock_cancel,grp:alts_toggle",
+--
+--     -- Use a specific keyboard variant if needed (e.g. intl for international keyboards).
+--     kb_variant = "intl",
+--
+--     -- Change speed of keyboard repeat.
+--     repeat_rate = 40,
+--     repeat_delay = 250,
+--
+--     -- Start with numlock on by default.
+--     numlock_by_default = true,
+--
+--     -- Increase sensitivity for mouse/trackpad (default: 0).
+--     sensitivity = 0.35,
+--
+--     -- Turn off mouse acceleration (default: adaptive).
+--     accel_profile = "flat",
+--
+--     touchpad = {
+--       -- Use natural (inverse) scrolling.
+--       natural_scroll = true,
+--
+--       -- Use two-finger clicks for right-click instead of lower-right corner.
+--       clickfinger_behavior = true,
+--
+--       -- Control the speed of your scrolling.
+--       scroll_factor = 0.4,
+--
+--       -- Enable the touchpad while typing.
+--       disable_while_typing = false,
+--
+--       -- Left-click-and-drag with three fingers.
+--       drag_3fg = 1,
+--     },
+--   },
+-- })
+
+-- App-specific touchpad scroll speeds.
+-- o.window("(Alacritty|kitty|foot)", { scroll_touchpad = 1.5 })
+-- o.window("com.mitchellh.ghostty", { scroll_touchpad = 0.2 })
+
+-- Enable touchpad gestures for changing workspaces.
+-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Gestures/
+hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })
+
+-- Enable touchpad gestures for moving focus (helpful on scrolling layout).
+-- hl.gesture({ fingers = 3, direction = "left", action = function() hl.dispatch(hl.dsp.focus({ direction = "l" })) end })
+-- hl.gesture({ fingers = 3, direction = "right", action = function() hl.dispatch(hl.dsp.focus({ direction = "r" })) end })
+
+-- lan-mouse (omarchy-handoff) virtual pointer: kill the SECOND acceleration pass.
+-- lan-mouse forwards RELATIVE deltas that the SENDING compositor has already
+-- accelerated. Omarchy leaves accel_profile unset (adaptive), so the receiver
+-- amplifies them again and the pointer arrives hypersensitive while the local
+-- trackpad feels normal. "flat" applies no curve, so a forwarded delta moves
+-- exactly as far as the sender intended.
+-- The name is "unknown-device" because wlr-virtual-pointer gives Hyprland no
+-- name (virtual KEYBOARDS get named, pointers don't). Verified on this machine
+-- with `lan-mouse test-emulation` + `hyprctl devices`: no real device here is
+-- named unknown-device* (real pointers are elan0138:*, mouse-passthrough*,
+-- dp-3-1), so this rule cannot touch the trackpad. Two entries because the
+-- daemon may hold more than one virtual pointer at a time.
+hl.device({ name = "unknown-device", sensitivity = 0, accel_profile = "flat" })
+hl.device({ name = "unknown-device-1", sensitivity = 0, accel_profile = "flat" })

config/hypr/monitors.lua

@@ -0,0 +1,48 @@
+-- BEGIN hyprmoncfg wake settings
+-- Shared with Omarchy while hyprmoncfg manages displays.
+hl.monitor({ output = "eDP-1", mode = "preferred", position = "0x0", scale = 1.25 })
+-- END hyprmoncfg wake settings
+-- See https://wiki.hypr.land/Configuring/Basics/Monitors/
+-- List current monitors and supported resolutions with: hyprctl monitors all
+--
+-- SINGLE SOURCE OF TRUTH for display config.
+-- Do not add monitor rules anywhere else (hyprland.lua, a hyprmoncfg-generated
+-- file, etc.) -- overlapping rules from several files were what made external
+-- displays unrecoverable before.
+
+local omarchy_gdk_scale = 1
+local omarchy_monitor_scale = 1.25
+
+hl.env("GDK_SCALE", tostring(omarchy_gdk_scale))
+
+-- Catch-all: anything not named below gets its EDID-preferred mode.
+hl.monitor({ output = "", mode = "preferred", position = "auto", scale = omarchy_monitor_scale })
+
+-- Built-in laptop panel.
+hl.monitor({
+  output = "desc:Chimei Innolux Corporation 0x1642",
+  mode = "1920x1200@60",
+  position = "auto",
+  scale = 1.25,
+})
+
+-- LG IPS236 on the laptop's own HDMI port.
+hl.monitor({
+  output = "desc:LG Electronics IPS236        105NDLS5A720",
+  mode = "1920x1080@60",
+  position = "auto",
+  scale = 1,
+})
+
+-- LG TV via the Anker USB-C dock.
+-- Deliberately NOT forced to 3840x2160@60: the dock negotiates DP alt-mode
+-- with only 2 lanes (pin assignment D), which leaves no bandwidth headroom at
+-- 4K60. Forcing it produced a "monitor has no mode" loop. "preferred" is
+-- 3840x2160@30 here, which links reliably. Use 1920x1080@120 instead if you
+-- want high refresh over this dock.
+hl.monitor({
+  output = "desc:LG Electronics LG TV SSCR2 0x01010101",
+  mode = "preferred",
+  position = "auto",
+  scale = 1.25,
+})