-- BEGIN hyprmoncfg wake settings
-- Shared with Omarchy while hyprmoncfg manages displays.
hl.monitor({ output = "eDP-1", mode = "preferred", position = "0x0", scale = 1.25 })
-- END hyprmoncfg wake settings
-- See https://wiki.hypr.land/Configuring/Basics/Monitors/
-- List current monitors and supported resolutions with: hyprctl monitors all
--
-- SINGLE SOURCE OF TRUTH for display config.
-- Do not add monitor rules anywhere else (hyprland.lua, a hyprmoncfg-generated
-- file, etc.) -- overlapping rules from several files were what made external
-- displays unrecoverable before.

local omarchy_gdk_scale = 1
local omarchy_monitor_scale = 1

hl.env("GDK_SCALE", tostring(omarchy_gdk_scale))

-- Catch-all: anything not named below gets its EDID-preferred mode.
hl.monitor({ output = "", mode = "preferred", position = "auto", scale = omarchy_monitor_scale })

-- Built-in laptop panel.
hl.monitor({
  output = "desc:Chimei Innolux Corporation 0x1642",
  mode = "1920x1200@60",
  position = "auto",
  scale = 1.25,
})

-- LG IPS236 on the laptop's own HDMI port.
hl.monitor({
  output = "desc:LG Electronics IPS236        105NDLS5A720",
  mode = "1920x1080@60",
  position = "auto",
  scale = 1,
})

-- LG TV via the Anker USB-C dock.
-- Deliberately NOT forced to 3840x2160@60: the dock negotiates DP alt-mode
-- with only 2 lanes (pin assignment D), which leaves no bandwidth headroom at
-- 4K60. Forcing it produced a "monitor has no mode" loop. "preferred" is
-- 3840x2160@30 here, which links reliably. Use 1920x1080@120 instead if you
-- want high refresh over this dock.
hl.monitor({
  output = "desc:LG Electronics LG TV SSCR2 0x01010101",
  mode = "preferred",
  position = "auto",
  scale = 1.25,
})