noconnorandClaude Opus 5
9ac198da26
Everything on top of a stock Omarchy 4.0.4-1 install, gathered so a second machine can be brought to the same state: the ~/.config files that actually differ from the shipped defaults, the three hand-built themes, the ten shell plugins pinned to commits, the two custom scripts, two user units, and the /etc drop-ins. install.sh applies it all idempotently, backing up anything it overwrites. capture.sh runs the other way so the repo stays the source of truth rather than a snapshot that rots. indie.herdr-hud's ten local-only commits ship as a git bundle plus a working-tree patch, since they stay off the upstream PR deliberately. Secrets, the dotfiles repo's territory (shell/git/mise), the remote-access stack and aether-managed themes are all scoped out; README says why for each. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
54 lines
1.9 KiB
Bash
Executable File
54 lines
1.9 KiB
Bash
Executable File
#!/bin/bash
|
|
# Release display pipes the kernel left enabled on unplugged connectors.
|
|
#
|
|
# After suspend/resume (or unplugging a USB-C display) i915 can leave a
|
|
# connector "disconnected" but still "enabled" on a pipe that Hyprland has
|
|
# forgotten. That pipe then blocks every other external output from
|
|
# modesetting (black screens, or a ~5 s re-modeset loop).
|
|
#
|
|
# Fix: force the connector on so Hyprland sees it, disable it from Hyprland
|
|
# (which releases the pipe), force it off, then return it to auto-detect.
|
|
# Never `hyprctl reload` here: a reload re-enables the connector while it is
|
|
# forced on and re-sticks the pipe.
|
|
|
|
log() { echo "fix-stuck-displays: $*"; logger -t fix-stuck-displays -- "$*"; }
|
|
|
|
wait_for() { # wait_for <seconds> <command...>
|
|
local n=$(( $1 * 4 )); shift
|
|
for _ in $(seq "$n"); do "$@" && return 0; sleep 0.25; done
|
|
return 1
|
|
}
|
|
|
|
stuck=()
|
|
for d in /sys/class/drm/card*-*; do
|
|
[[ -f $d/status && -f $d/enabled ]] || continue
|
|
[[ $d == *eDP* ]] && continue
|
|
[[ $(<"$d/status") == disconnected && $(<"$d/enabled") == enabled ]] && stuck+=("$d")
|
|
done
|
|
|
|
if (( ${#stuck[@]} == 0 )); then
|
|
log "no stuck connectors"
|
|
exit 0
|
|
fi
|
|
|
|
systemctl --user stop hyprmoncfgd
|
|
|
|
for d in "${stuck[@]}"; do
|
|
out=${d##*/card*-}
|
|
log "releasing $out"
|
|
echo on | sudo -n tee "$d/status" >/dev/null
|
|
wait_for 5 sh -c "hyprctl monitors all | grep -q '^Monitor $out '" || log "$out never appeared in Hyprland"
|
|
hyprctl eval "hl.monitor({ output = \"$out\", disabled = true })" >/dev/null
|
|
wait_for 5 grep -qx disabled "$d/enabled" || log "$out still enabled after disable"
|
|
echo off | sudo -n tee "$d/status" >/dev/null
|
|
sleep 1
|
|
echo detect | sudo -n tee "$d/status" >/dev/null
|
|
log "$out now $(<"$d/status") $(<"$d/enabled")"
|
|
done
|
|
|
|
# Drop any low-refresh fallback hyprmoncfgd wrote while outputs were failing.
|
|
rm -f ~/.config/hyprmoncfg/display-fallbacks.json
|
|
|
|
# hyprmoncfgd re-applies the matching profile (modes, positions) on startup.
|
|
systemctl --user start hyprmoncfgd
|